DCS ENGINEER

Date: 18 Nov 2026

Location: IN

Company: shyamsteelT1

Established in 1953, Shyam Steel Group is one of the leading TMT Bar producers in India, manufacturing TMT Rebar, Billets, Sponge Iron and Ferro Alloys. Shyam Steel has also expanded its business in Construction Solutions, FMCG, Infrastructure, IT & ITeS Solutions etc. Operating with cutting-edge technology in order to meet the stringent requirements of its reputed customers both in India and abroad. Shyam Steel has emerged as a large, growing, competitive and multi-product organization by delivering quality material & service through innovation, excellence, and dedication.

2. Key Roles and Responsibilities

A. WHRB DCS Operation

  • Monitor and operate WHRB equipment through the DCS control panel.

  • Monitor boiler operating parameters continuously.

  • Maintain steam pressure, temperature, drum level, and steam flow within approved operating limits.

  • Monitor and control boiler feedwater flow.

  • Monitor flue gas temperature at boiler inlet and outlet.

  • Monitor furnace/boiler draft and gas-side pressure.

  • Coordinate with field operators during start-up, shutdown, and normal operation.

  • Take appropriate action during operational abnormalities according to approved SOPs.

B. Monitoring of Important WHRB Parameters

Parameter

Monitoring purpose

Steam pressure

Maintain required steam pressure

Steam temperature

Ensure steam quality

Drum level

Maintain safe water inventory

Feedwater flow

Maintain boiler water balance

Steam flow

Monitor steam generation

Flue gas inlet temperature

Monitor heat input

Flue gas outlet temperature

Monitor heat recovery

Drum pressure

Monitor boiler pressure

Furnace draft

Maintain proper gas flow

Feedwater temperature

Monitor feedwater condition

Deaerator level

Ensure feedwater availability

Economizer parameters

Monitor heat recovery performance

Superheater temperature

Monitor steam temperature

 

C. Boiler Equipment Monitoring

Waste Heat Recovery Devices by Varun Pratap Singh | PPTX
 

1. Waste Heat Recovery Boiler

  • Monitor boiler pressure and temperature.

  • Monitor gas-side and water-side conditions.

  • Check boiler performance and heat recovery.

 
Boiler Water Level Control System Example | Introduction to Industrial Instrumentation | Textbook
 

2. Steam Drum

  • Monitor drum level and pressure.

  • Monitor drum level control valves.

  • Maintain proper water inventory as per SOP.

 
Datang 8t Steam Boiler Accessories Economizer with Finned Tubes for Heat Recovery Heat Exchange - Boiler Accessories Economizer and Economizer
 

3. Economizer

  • Monitor feedwater inlet and outlet temperatures.

  • Monitor gas-side temperature and differential pressure.

  • Identify abnormal heat transfer conditions.

 
Ultimate Steam Temperature Solution High Efficiency Boiler Superheater for Thermal Power Plant - Superheater Heating Surface and Coal Power Plant
 

4. Superheater

  • Monitor steam outlet temperature.

  • Monitor superheater performance.

  • Observe temperature deviations and alarms.

 
Keeping the power plants online | Sulzer
 

5. Boiler Feed Water Pump (BFWP)

  • Monitor pump suction and discharge pressure.

  • Monitor pump current, vibration, and temperature.

  • Ensure reliable feedwater supply.

 
Sootblower- Long Retractable Sootblower of Boiler, LMD-PSSL, LMD-PSLL, LMD-PSSL/B - ZHEJIANG LEMOND POWER EQUIPMENT CO., LTD | Sootblower, Boiler sootblower Supplier on TradeAsia
 

6. Soot Blower System

  • Monitor soot-blowing sequence.

  • Coordinate soot blowing with field operators.

  • Monitor boiler heat-transfer performance.

D. DCS Monitoring and Control

  • Monitor process parameters through DCS graphics.

  • Monitor trends, alarms, and event logs.

  • Understand process interlocks and permissive conditions.

  • Monitor automatic and manual control modes.

  • Monitor control valves and damper positions.

  • Coordinate with field operators for equipment inspection.

  • Maintain shift-wise operating records.

E. Start-up and Shutdown Activities

  • Assist in WHRB start-up and shutdown as per approved SOP.

  • Coordinate with DRI kiln operators regarding waste gas availability.

  • Monitor boiler warming-up and pressure-building activities.

  • Monitor drum level and steam temperature during start-up.

  • Coordinate steam line warming and synchronization requirements with the turbine operation team.

  • Follow approved procedures during emergency shutdowns.

F. Coordination with Other Departments

  • Coordinate with DRI operation for kiln waste gas conditions.

  • Coordinate with CPP turbine operators for steam demand and supply.

  • Coordinate with water treatment plant operators for DM water availability.

  • Coordinate with electrical and instrumentation teams during equipment abnormalities.

  • Inform the shift in-charge about abnormal operating conditions.

G. Safety Responsibilities

  • Follow boiler operating safety standards.

  • Follow approved SOPs and emergency procedures.

  • Monitor boiler alarms and trip indications.

  • Ensure proper communication between DCS and field operators.

  • Follow PPE and permit-to-work requirements.

  • Maintain safe operating conditions for high-pressure steam equipment.

3. Important WHRB DCS Parameters

The following parameters should be understood by every WHRB DCS engineer.

Parameter

What to understand

Drum level

Water inventory and level control

Drum pressure

Boiler operating pressure

Main steam pressure

Steam supply pressure

Main steam temperature

Steam outlet temperature

Feedwater flow

Water entering the boiler

Steam flow

Steam generation rate

Gas inlet temperature

Waste heat input

Gas outlet temperature

Heat recovery condition

Furnace draft

Gas flow and pressure condition

Economizer temperature

Heat transfer performance

Deaerator pressure

Feedwater conditioning

BFW pump discharge pressure

Feedwater supply condition

 

Note: Actual operating limits and alarm/trip setpoints must be taken from the plant's approved operating manual and OEM documentation.

4. Important DCS Control Loops

A WHRB DCS engineer should understand the following control loops:

  1. Drum Level Control: Maintains the required drum water level.

  2. Steam Pressure Control: Monitors and regulates steam pressure through the approved control philosophy.

  3. Steam Temperature Control: Maintains steam temperature within specified limits.

  4. Feedwater Flow Control: Controls feedwater supply to the boiler.

  5. Draft Pressure Control: Maintains the required gas-side pressure.

  6. Deaerator Level Control: Maintains deaerator water level.

  7. Deaerator Pressure Control: Maintains deaerator operating pressure.

5. Daily Responsibilities of a WHRB DCS Engineer

Shift activity

Responsibility

Shift handover

Understand previous shift conditions

Routine monitoring

Monitor all important DCS parameters

Alarm monitoring

Identify and report abnormal alarms

Field coordination

Communicate with field operators

Process control

Maintain stable boiler operation

Logbook

Record hourly operating parameters

Abnormality reporting

Inform shift in-charge

Shift handover

Communicate equipment and process status

 

6. Required Technical Knowledge

  • Basic thermodynamics and heat transfer.

  • Boiler working principle and construction.

  • Steam generation cycle.

  • Rankine cycle fundamentals.

  • Water and steam properties.

  • DCS operation and process monitoring.

  • PID control fundamentals.

  • Control valves and actuators.

  • Pumps and auxiliary equipment.

  • Boiler safety devices and interlocks.

  • Basic knowledge of PLC and instrumentation.

7. Key Performance Indicators (KPIs)

  • WHRB availability and reliability.

  • Stable steam generation.

  • Boiler thermal performance.

  • Compliance with steam pressure and temperature requirements.

  • Reduction in boiler trips and forced outages.

  • Proper drum level management.

  • Efficient heat recovery.

  • Compliance with safety and operating procedures.

  • Accurate shift logbook and reporting.

8. Career Growth

  1. Graduate Engineer Trainee (GET)
  2. Junior Engineer – CPP Operation
  3. WHRB DCS Engineer
  4. Senior DCS Engineer
  5. Shift Engineer – CPP
  6. Assistant Manager – CPP Operation
  7. Shift In-charge / Manager – CPP

9. Top 15 Interview Questions for a WHRB DCS Engineer

  1. What is WHRB and how does it work?

  2. Why is WHRB installed in a DRI plant?

  3. What is the function of a steam drum?

  4. What is the difference between economizer and superheater?

  5. What is the importance of drum level control?

  6. What is the difference between single-element, two-element, and three-element drum level control?

  7. What is the function of a deaerator?

  8. What is the function of a boiler feedwater pump?

  9. What is the purpose of a soot blower?

  10. What is boiler blowdown?

  11. What is the difference between saturated and superheated steam?

  12. What is the function of a safety valve?

  13. What is the significance of boiler draft?

  14. What is the function of PID control in DCS?

  15. What precautions are required during WHRB start-up and shutdown?

 

10. Recommended Learning Priorities for a WHRB DCS GET

First month – Basic understanding

  • WHRB construction and working principle.

  • Steam generation process.

  • Boiler components and their functions.

 

Second month – DCS operation

  • DCS graphics and trends.

  • Alarm and event monitoring.

  • Drum level, pressure, and temperature control.

 

Third month – Practical operation

  • Field equipment identification.

  • Shift logbook preparation.

  • Coordination with DRI and turbine operators.

  • Understanding abnormal conditions and SOPs.

......................